ExpLoRer

SODAQ ExpLoRer

Sodaq ExpLoRer

Overview:

This is the brand-new ExpLoRer board that we designed for Microchip. Please visit  SODAQ's Support page to see the schematics and how to get started with the new ExpLoRer. By clicking here, you will be redirected to the page. 

Features:

- Atmel SAMD21, 32 bits Arm Cortex M0 microcontroller
- Microchip RN2483A OR RN2903 LoRa module
- Microchip RN4871 Bluetooth 4.2 module (BLE) with ceramic antenna
- Atmel ATECC508A1 crypto chip to securely store your LoRa keys.
- Atmel SST25PF040C serial flash chip (4Mbit)
MCP 73831 Charge controller and on-board rechargeable coin cell battery embedded (PCB) LoRa antenna
MCP97001 temperature sensor
- RGB LED
- Micro USB Connector

Have questions? Contact our ITS department anytime by email, or by phone at 416-859-5036. 

Specifications:

Microcontroller  ATSAMD21J18, 32-Bit ARM Cortex M0+
Compatibility Arduino M0 Compatible
Size 93 x 55 mm
Operating Voltage 3.3V
I/O Pins 20
Analog Output Pin 10-bit DAC
External Interrupts Available on all pins
DC Current per I/O pin 7 mA
Flash Memory 256 KB and  4MB (external flash)
SRAM 32KB
EEPROM Up to 16KB by emulation
Clock Speed 48 MHz
Power 5V USB power and/or 3.7 LiPo battery
Charging Solar charge controller, up to 500mA charge current
LED RGB LED, Blue LED
LoRa Microchip RN2483A Module
Bluetooth Microchip RN4871 Module
Cyptochip ATECC508A
Temperature sensor MCP9700AT
USB MicroUSB Port


Intended use
 
The ExpLoRer is a development/evaluation tool intended for the evaluation of Microchip wireless modules in a Research and Development laboratory environment. It is not a Finished Appliance. Manufacturers who integrate ExpLoRer in a Finished Appliance product must take responsibility to follow regulatory guidelines, for example for CE marking.

Stinson Owl-Lite is a Distributor for:
m
averydennison
mdiworldwide
orafol
tapco
trinityhighwayproducts
vermac
rszbonesafetysignslogo2